Stephan Bucher wrote:
> I can not access SD memory cards larger than 2GB on my eCS 1.2R system.
> I am using a SanDisk SDDR-113 USB reader which was supplied with SanDisk 
> 4GB SD cards. Cards up to 2GB can be accessed without a problem.
> With 4GB cards, I first get the message that the "drive F: has been 
> connected", but then like the "drive can not be
accessed", "is not 
> formatted", "does not contain any objects".
> I have the FAT32.IFS driver version 0.94 with PARTFILT.FLT installed.
> What am I doing wrong?
> Thanks for any suggestions.
> Regards, Stephan
>
>   
Hi Stephan,

Running eCS 1.2, you shouldn't be runninG PARTFILT.FLT - that's only 
intended for non-LVM systems - e.g. Warp pre-MCP1. You _are_ running 
OS2DASD.DMD not DANIDASD.DMD aren't you?
Also I'd suggest you update FAT32.IFS to version 0.9.11

Regards,
Mike

-- 
Failed the exam for
--------------------
MCSE - Minesweeper Consultant and Solitaire Expert
--------------------
Personal replies to any of :
mikeoc (at) internode (dot) on (dot) net
mikeoc (at) austarnet (dot) com (dot) au
majilok (at) gmail (dot) com
[Please ZIP any attachments, other than GIF/JPG or plain-text]


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2user/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2user/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2user-digest{at}yahoogroups.com 
    mailto:os2user-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2user-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---