> Yes, I am using the -22 beta since 9/18. It works very well except 
 > for one
 > thing. My SupraSonic display is configured to show ALL connection 
 > data but
 > when I use it on my PPP Internet account all I see is the first 
 > screen and
 > just the RX speed, TX speed is blank. Is this the way it works with 
 > PPP or
 > do I have to reconfigure something? On a non Internet connection to 
 > a BBS
 > the display alternates data screens as it is supposed to.
        That sounds like the modem is locking up (that screen and 
        speed should update correctly.) :-(
        Did the connection to that site work correctly with older
        code?             
        Have you tried setting S193=0 to disable serial plug-n-play?
        -Patrick
--- FLAME v1.1
---------------
** A related thread FOLLOWS this message.

FIDO MESSAGE AREA==> TOPIC: 267 SUPRA MODEMS  Ref: DECE2762 Date: 10/08/96
From: KEN SCHMIDT                                           Time: 10:46am
\/To: PATRICK MOORE                                       (Read 3 times)
Subj: R: BETA -22

PM> > Yes, I am using the -22 beta since 9/18. It works very well except
PM> > for one
PM> > thing. My SupraSonic display is configured to show ALL connection
PM> > data but
PM> > when I use it on my PPP Internet account all I see is the first
PM> > screen and
PM> > just the RX speed, TX speed is blank. Is this the way it works with
PM> > PPP or
PM> > do I have to reconfigure something? On a non Internet connection to
PM> > a BBS
PM> > the display alternates data screens as it is supposed to.
PM>        That sounds like the modem is locking up (that screen and
PM>        speed should update correctly.) :-(
PM>        Did the connection to that site work correctly with older
PM>        code?
PM>        Have you tried setting S193=0 to disable serial plug-n-play?
PM>        -Patrick
PM>--- FLAME v1.1
 
Thanks for the suggestions. Hans gave a few ideas to try and his
suggestions got everything working execept I still do not get the TX speed
in the display. I was sending my S regs settings via the init string. Hans
suggested I write the settings to NRAM. This idea works much better
although I have no idea why it should. I will try the S193 setting and see
how that works.
---------------
>>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<<

FIDO MESSAGE AREA==> TOPIC: 267 SUPRA MODEMS  Ref: DEC00029 Date: 10/07/96
From: PATRICK MOORE                                         Time: 07:32am
\/To: GER DUUT                                            (Read 3 times)
Subj: EURO ISDN

 > Do you know when there will be a release of a SUPRA EURO ISDN card.
        As we currently don't market any ISDN cards, I would
        say no time in the near future.
        -Patrick
--- FLAME v1.1
---------------