PE> However, I can tell you that the x'91'/x'11' come in up to 3-6
PE> seconds after the CONNECT message, and I doubt any S-register will
PE> give such a massive delay in negotiating EC.

IS> On the DPX596:

IS> The AT&F default is 50 (5 seconds).  I've run with it set to 60
(6 seconds) 

Fair enough!  I think I've found the right S-register now, and it
looks like I was right about my modem anyway, albeit not yours!

S REGISTER        MEANING
62                V.42 Detection Timer

S Register 62 allows you to set the V.42 detection timer.  This specifies
how long (in units of 0.01 seconds) the modem will send a V.42 detection
pattern and wait for a V.42 detection pattern from the other modem. 

The originating modem sends the pattern then waits for a reply, the
answering modem waits for the pattern then sends one in reply.

+    Changing the value of this S Register may cause unreliable operation
when attempting     V.42 connections.

Example
ATS62=100        Set the timer to one second

Range
0-255

Default
75    (0.75 seconds)

See Also
#J command        V.42 Compatibility
@EOT:

---