In a message to John Hentsch  Charles Bowman wrote:
CB>    4.  Tried to apply FP3 to bring the restored features to the same 
evel
CB> as the rest of the OS and get a Corrective Service Facility error 
essage,
CB> "A previous installation of service is still pending.  The system must be
CB> rebooted to allow the process to complete before applying additional
CB> service."
Sounds like the locked driver is still loaded. I wonder why it isn't
finishing? It should run part way through boot up, replaced the files on
the locked files lists, then reboot.
CB> I've followed everything I could find in the readme's and can't make that
CB> message go away.  Any ideas?   The good part though is that everything
CB> appears to be running super.  Maybe I should leave well enough alone. 
Check the top of the config.sys for the locked driver statement. If it
won't finish, I suppose you need to manually intervene. There is a
procedure to remove the references to existing fixpacks on you
harddrive:
                    October 18, 1996 - Warp FixPak TIPS
  RECOVERING FIXPAK ARCHIVE AND BACKUP SPACE
  Warning: Make sure you read and understand the following before
  removing the Archive and Backup files and directories.
  You can recover the space used for FixPak Archive and Backup files as
  long as you understand that doing this prevents you from being able to
  backout to the previous Backup or Archive level. If it becomes
  necessary at a later time to backout a FixPak, the only way you can do
  this is to reinstall Warp.
  Do the following to delete the FixPak Backup and Archive files and
  remove the files used by CSF to keep track of what service has been
  applied to your system.
  1.  Delete every instance of the following files on your system
      (search every drive and every directory they contain).
  LOGF0000.*   (can be OS2 or MPM)
  LOGSTART.*   (can be OS2 or MPM)
  LOGARCH.*    (can be OS2 or MPM)
  CSF_*.*
  FIXSTART
  2.  Delete the files in the FixPak Archive and Backup directories on
  your harddisk. 3.  Remove the FixPak Archive and Backup directories
  with the RMDIR command.

Check out the readme.tip file and see if thee is anything else you may
be able to do.
jh -
 * WCE 2.1G1/2241 * 
---                    
---------------