-=> Quoting Conrad Tsang to All <=-

 CT> While reading my Spirit Viper modem manual, I cam across a section.

 CT> I can either

 CT> 1. Disable line quality monitor and auto-retrain
 CT> 2. Enable line quality monitor and auto-retrain
 CT> 3. Enable ilne quality monitor and fallback/fall forward
 CT> 3. enable line quality moniitor and auto-retrain, but hang-up
 CT> immediately when EQM reaches hang-up threshold

 AT%E - Enable/Disable Auto-Retain & Speed Shift

 AT%E0     Disable auto-retain
 AT%E1     Enable auto-retain
 AT%E2     Allow on-line fallback
 AT%E3     Allow on-line fallback & fall-forward (DEFAULT)

 Quoted from Spirit Viper manual, pages 49-50

 CT> Which option is best for my v.34 modem. The default has it at 1, but I
 CT> cannot 28800 with that, I only get 26400.

 CT> Alternatively, if someone has a good init string for the Spirit Viper,
 CT> can you please tell me.

 CT> thanks

 AT&F works fine for me :) Except for ATW2 for comms programs.

 Jason



... "Yield to temptation, it may not pass your way again." - L. Long
--- Blue Wave/RA v2.20 [NR]
(3:712/941)