On 05-27-95 Lila Godel said to All  about Qmpro for Windows 1.11b D
LG>This message was originally addressed to ALL
LG>and a carbon copy was sent to you.
LG>                    ----------------------------------------
LG>Me and my Dad recently switched some systems around.  In the
LG>process we moved a hard drive with Qmpro for Windows 1.01 from a
LG>CompuAdd 320 to a CompuAdd 325 with both systems being DXs.  After
LG>the switch I modified the 325 to use a Tens (SP?) 800x600 Small
LG>driver on a CompuAdd High Res Windows driver disk we have in place
LG>of the Windows VGA previously installed on the hard drive.  The the
LG>320 had supported only low res drivers, but the 325 did and I
LG>wanted to use one.  Today I upgraded the Qmpro for Windows to 1.11b
LG>using the 1.10 and 1.11b patches from the Mustang HQ. When loading
LG>it to make sure it was at 1.11b I noticed that unlike on a 486/DX
LG>66 we have with a TRIDENT 800x600-256c for 1M Board (Faster) driver
LG>there was no pattern visible as with the VGA driver.  I would like
LG>to have the patter visible.  Any ideas on how to make the Windows
LG>size the right size for this driver so I can see the pattern?
        To change the screen size so that you can see the wall paper, 
do the following:
                1. Select options
                2. Select emulations
                3. Set the Screen Height and Font size for each 
emulation that you use until the screen size for each one suites you.
        Hope this helps you!
         -------------========>>========-----------
... "Man that lightning sounds clo +O^|+a- NO CARRIER"
* CMPQwk 1.42-R2 780 *
--- Maximus 2.02
---------------