JM>> Black -- Battery -
 JM>> Yellow -- Signal
 JM>> White -- Battery split voltage (Normally not used)
 JM>> Yes, there was a red with the white & black
 TS> Thanks for the info John...now all I need to do is find out where that
 TS> red wire came from on the board...
 JM> Which board?
On the speed controller board... as I remember I cut the plug off to put on a 
sail controller that I built, the black and white were cut but the red came 
out of the unit and I can't tell where it came from... it looks like there 
are two possibilities both being on the lower right hand corner on the back 
side with the heat sink at the top...
           -=Tony=-
--- QM v1.31 
---------------