->On 07-29-97  16:50 Guy Was discussing USR 28.8 with All<-
 
 GB> Good day everybody ...  I have a small problem ... would appreciate
 GB> help with. 
 GB> I use a USR 28.8 internal modem on a 586amd 133mghrz 24mg Ram
 GB> software is windows 95 and Procomm for windows.
 
 GB> The problem is this:   when I configure Procomm at 28.8 the modem goes
 GB> dead  when I try activating a dial ... no dial tone ... no nothing ...
 GB> I have to  configure it at 19.2  then it works ... but at 14.4 ...
 
 GB> windows 95 calls for Usr 28.8 ... I have a Usr 28.8 modem support
 GB> update ... Where do I go wrong ???
 
 GB> Thank you kindly for your help.
 
 GB> Guy Baron
 
    Sounds to me like you have a com port setup inproperly. Although I'm
 not that familiar with Win95. I believe the com port setup is in the
 "Control Panel" under ports. Check to ensure that the port speed is set
 at, or above 33.6k. That should correct your problem, as it seems to
 function ok at the lower port speeds.
 
 
___ Blue Wave/DOS v2.30
 
--- TriToss (tm) Professional 10.0 - #246
---------------