Netcomm problem number 5 has been updated significantly...

5. Getting 28800 (no EC) connects (3) to 03-9338-3794.  Sysop has
a Hayes Optima 288 V.34 online there.  I dropped my com port
speed down to 19200 in order to force a lower speed connect, and
I connected fine first go.  Actually, this problem only occurred
when I had AT%L13 (default) in.  I tried again with AT%L11 and it
worked fine (2/2).  Here is some debugging info reported by the
modem when I tried again with AT%L13 (and it failed):

atdt0393383794
Initialise.. 00003mS
Offhook.. 00610mS
Listening.. 00664mS
Call Progress.. 00769mS
Call progress tones with ON periods less than 10mS ignored (S52)
Call progress tones with OFF periods less than 300mS ignored (S53*10)

ON: 00000mS OFF: 02375mS 10 10 10 10 10 10 10 10 10 10 
RINGING
Connect Auto.. 04862mS
Auto OK.. 00CB 14359
RLSD UP 14362mS
CTS UP 14366mS
Connected at 00CB 14372
Initial EQM = 0008 14379
ARQ Start 00000
V.42 attempt 00000

**** - the above is normal, the stuff below I have not seen before

Retrain 02840
Send LR 09460
Resend LR 11460
No response LR 13460
MNP fail 13460

Terminal      : 57600  8 data bits  No Parity
Line          : 26400  V.34
Error Correct : None
Compression   : None
Encryption    : None
Current EQM   : 006 
EQM Retrain at: 098 
Rx Level(-dBm): 026 (036 )

CONNECT 26400
[a whole lot of x'7f' followed by x'fe' pairs]
[other modem hung up on me]
NO CARRIER
Disconnect reason = 3:4
@EOT:

---