Hello John,

On Mar 24 15:21 in a msg to Poe Lim, John Clarke of 3:713/730 wrote:

 JC> This one has a single 10 pole dip switch plus a 2 pole switch with
 JC> both poles locked so they switch together.  The 10 pole switch is
 JC> black while the 2 pole switch is red.  I have no info about this
 JC> switch in the handbook that I can find.  It is currently set to 1. 

Sorry to say that the red switch is the equiv of the quad switch; mine has
one too, and it is definitly a daughterboard.

 JC> I recall a message in the USR echo saying single board types only
 JC> had the 10 pole dip switch while the daughter board types had an
 JC> extra quad switch - mine is half way there. :-)  Do you have any
 JC> info on this switch.

Isn't the info printed on the bottom of the case? FWIW, I left it on the
standard setting, and have never changed it.

 JC> I haven't opened up the case yet.  I presume that the screws are
 JC> beneath the rubber feet but how do you get to them?  Are the rubber
 JC> feet glued on? 

The back tow are; just move them, and the screws are under that. I had to
open mine to do the 28.8k upgrade.

Cheers,
Poe

--- timEd/2 1.10+