From: AMaroney{at}sptimes.com
To: atm{at}shore.net
Reply-To: AMaroney{at}sptimes.com


This is a multipart message in MIME format.
--=_alternative 0076C08F85256CAE_=
Content-Type: text/plain; charset="us-ascii"

Box joints (aka: finger joints) are a wonderful thing.   If you have
access to a table saw look here:

        http://www.netexperts.cc/~lambertm/Wood/lynnjig.html

I made a eyepiece case that's holding 40+ pounds of eyepieces and the box
is solid as a rock. See it here:

        http://home1.gte.net/amaroney/allen/ep_case/epcase.htm

Make the cuts a little deeper than what's needed and use a router with a
flush trim bit to make them flush.  Also make some test cuts first.

Worry less...



--=_alternative 0076C08F85256CAE_=
Content-Type: text/html; charset="us-ascii"


Box joints (aka:
finger joints) are a
wonderful thing.   If you have access to a table saw look here:

 
     
http://www.netexperts.cc/~lambertm/Wood/lynnjig.html;

I made a eyepiece
case that's holding 40+
pounds of eyepieces and the box is solid as a rock. See it here:

 
     
http://home1.gte.net/amaroney/allen/ep_case/epcase.htm;

Make the cuts a
little deeper than what's
needed and use a router with a flush trim bit to make them flush.
 Also make some test cuts first.

Worry less...



--=_alternative 0076C08F85256CAE_=--

--- BBBS/NT v4.00 MP