Oh yes, you may have to check to which printer port your HP is connected
(properties, output port (tab)). Then LMB port of choice (LPT1 I presume).
My bet is it's showing LPT2 now... :-)

Regards,
Jan
..._._


os2hardwarel{at}ftn.wpusa.dynip.com wrote:
> 
> I'd like to uninstall the drivers for my Lexmark z51 printer, and
install an HP Deskjet 920c.  I can't seem to do it.  The Lexijet driver
still shows on the first page of printer properties, and the z51 object
still is on the desktop.  I installed the omni driver for the 920c, and set
it as default, but something is obviously wrong.  What do I do to get the
920c working, and the Lexmark uninstalled?
> 
> I also need the windows 3.1 drivers for the 920c, if anyone has them,
but I have to get the printer working in os/2 first.  *adh*
> --
> NOTE: NEW DOMAIN NAME! .ftn.wpusa.dynip.com UPDATE AS NEEDED!
> 
> | Fidonet:  Alan Hess 1:261/1000
> | Internet: Alan.Hess{at}261-1000.ftn.wpusa.dynip.com
> | via Waldo's Place USA FidonetInternet Gateway Site
> | Standard disclaimer: The views of this user are strictly his own.

-- 

Why change browser?  http://www.switch2firefox.com/  That's why!



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---