For those interested, this was posted in the eCS hardware groups and
my response to the post.

Keith Marjerison wrote:
> Hello All;
>     I just tested the Brother HL-2070n monochrome laser printer
using the
> Brother HL-2060 printer driver. This printer was very easy to set up
> using USB, parallel or ethernet connectors. The network setup was
> simple, plug it in to the network and print a test page. Take settings
> from test page and plug them in to SLPR port settings and pick a driver.
> I used the Brother HL-2060 Laser driver included in the latest Omni
> package. This printer can be set up with any Web browser right out of
> the box. You do not have to boot to Windoze and change any network
> settings for eCS to see this printer. It defaults to DHCP, and unlike
> the Lexmark E120n, can be seen at the AUTO assigned IP address.
>     This is another nice monochrome laser printer for eCS for under
$250.oo
> Canadian. It is fast, has 16 Mb of ram and emulates an HP Laserjet,
> Epson FX-850 and an IBM Proprinter, so there should be no problem
> printing from DOS or Win 3.11.
> Hope this helps anyone looking for a new printer for eCS.

Thank you Keith!  You are a life saver.  I have tried to get the
HL-2070N printer to work under eCS for over a year using post script
drivers created from the WindowsXP post script driver.  I was
unsuccessful.  The HL-2060 laserjet driver works great and I am using
the USB port on the printer.  It now makes me wonder if the HL-2060
post script driver included with the eCS driver package would work for
post script.

David 






 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---