In , on 08/17/06 
   at 10:44 PM, "Steve Wendt"  said:



>Hello all,

>I just got an Olympus SP-350 camera.  The USB connection works quite
>nicely in  Linux, so I thought I would try getting it working in OS/2 as
>well.  I installed the  latest (10.162) USB Basic and MSD drivers, and
>they all load quite happily.  When  I attach the camera, it gets assigned
>a drive letter.  However, I cannot access it - it  gave it the wrong
>geometry, or something.

>I found Yuri Dario's old patch for Olympus cameras, but the hex sequence
>listed  isn't in the latest USBMSD drivers.  I also tried CWUSBMSD, but
>that does the  same thing as the latest IBM driver.

>Anyone have clever suggestions?  I intend to buy an XD-Picture card and 
>XD->USB adapter for it, so perhaps that will work better...


Steve,

FWIW, I have been using the 10.145 drivers to access a SP-500UZ (1G xD
card) without problems (Fat16 access).  I can use Netdrive to mount it as
a fat32 drive.  But I have never seen long file names on the disk.

Perhaps something is interfering with the drivers and the camera.  

It is also possible that my camera works better with the drivers than
yours.  But that seems more of a long shot to me.  

I wish I had a clever suggestion.


-Mark Vollmer
--



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---