-=> Quoting Ross Evans to All <=-

 RE> Hi
 RE> I have an E11F automodem which I have had for some months now and have
 RE> never been able to get it to work properly I use TE2  term program and
 RE> use ATZ^M for the init string. The modem has been connecting at
 RE> 28800BPS but after receiving a small amount of DATA hangs, (ie on the
 RE> Melb PC user Group BBS, I receive "Maximus v 3.1" and then it stops
 RE> receiving.) it remains connected but doesnt respond to any commands I
 RE> try to give it. The only way I have of getting back control is to
 RE> switch the modem off and start over with the same result. Yesterday
 RE> however I discovered that if I change the "S46" to a
value of 136, -
 RE> which actually turns the compression off -the modem will indeed work
 RE> ok. However the problem I have now is that after 2min 33sec the modem
 RE> drops the line. Can any one help me with this problem.?  
 RE> -!-
 RE>  ! Origin: Melbourne PC User Group BBS (3:632/309)

          Yeah, if you happent to have a white Telecom 200 phone plugged
          into the line with a double adaptor or in another socket, make 
          sure that the phone is not on the line when you are using the 
          modem.

          Good luck

          ASH

--- Blue Wave/DOS v2.20