Warren, at 19:34 on Mar 28 1996, you wrote to All...

WH> Have a friend who purchased a ZOLTRIX internal modem in Hong Kong!
WH> Yup! You guessed it - it doesn't quite work right.

Zoltrix are cheap OEM Rockwell clones, and are missing several AT command
set options, even though they still support hardware EC snd compression (at
least they're not an RPI model).

WH> Can't seem to get it to dial out - error message "No dial tone"
WH> I can dial into it - no worries

Try this fairly basic string - AT&F&C1&D2X3&W| sent once
only, then called from NVRAM with a terminit of ATZ|.  The X3 is there
because these modems don't 
normally detect local telco service tones.

Regards, Bill

--- Msgedsq/2 3.20