For the last couple of months I have been getting traps in AICU160.ADD. 
Sometimes upon a reboot I would see a message reporting a problem with 
channel B.  Others times I could not boot because it could not find my 
scsi drive which I boot from.

This led me to believe that I had scsi hardware problems.  Since the 
scsi was on-board I began looking for a scsi card to put in the 
machine.Today I disabled the on board scsi and installed a Adaptec 
29160.  (the on-board scsi was also adapted).  I was up and running for 
about 10 minutes when I got the following trap:

Exception in module: AICU160
TRAP 000d ERRCD=0000 ERACC=**** ERLIM=******** CPU=1
EAX=00000040 EBX=ffeb0ce9 ECX=80010000 EDX=00000000
ESI=ff800000 EDI=fd400ce9 EBP=f8f8ff72 FLG=00010013
CS:EIP=0710:0000a000 CSACC=009b CSLIM=0000ea37
SS:ESP=15e8:000ff64 SSACC=0097 SSLIM=0000dfff
DS=0700 DSACC=0093 DSLIM=0000b628 CR0=8001003b
ES=0000 ESACC=**** ESLIM=******** CR2=1c1547b0
FS=0000 FSACC=**** FSLIM=********
GS=0000 GSACC=**** GSLIM=********

The system detected an internal processing error at
location ##0168:fff0f667 - 000f:e667
60000, 9084

0886090f
Internal revision 14.103a_SMP

The system is stopped.  Record all of the above information and
contact your service representative.

Anyone have any ideas what is happening?  Could the AICU160.ADD be 
corrupted and replacing it with a fresh copy be in order?

Thanks for any help.

Regards,  Jim


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---