In , on 11/22/07
   at 09:51 AM, Jim Byrnes  said:

Hi,

>I remember when I added the SATA to the SCSI system I had to add I 
>beleive it was !BIOS to danis506.

That bypasses the possible creation of a DOS VDM during boot time.  Some
modern systems don't handle this well.

>> Finally check the MB BIOS settings.  They all seem have a different set of
>> options to select alternate boot devices.

>See my reply to Ed.  Today with no changes it seems to be working OK 
>which probably means I have more problems lurking somewhere.

This make it appear to be a possilble cable/connector issue.

Steven

-- 
----------------------------------------------------------------------
"Steven Levine"   MR2/ICE 3.00 beta
09pre #10183 eCS/Warp/DIY/14.103a_W4 etc.
www.scoug.com irc.ca.webbnet.info #scoug (Wed 7pm PST)
----------------------------------------------------------------------



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---