Hello Will,
Replying to a message of Will Honea to Alec Herrmann:
 WH> Alec, you seem to be a likely source for an answer to this: Can I use
 WH> the remote install process from a machine running Merlin to upgrade a
 WH> second machine (with Connect, now) or do I need Server (Warp or LS)
You can use Warp 4.0 (Merlin) on the source machine to install Warp 4.0 on a 
second remote machine via network cable.
 WH> on the source machine?  I tried, but I keep getting messed up with
 WH> the Attach process and wind up not being able to find the server. 
1) Start the INSTALL.CMD program on your Warp 4.0 CD.  Pick a drive (ie C:) 
for the installation program.
2) Go thru the steps for installing on a _remote_ computer.  When asked for a 
network card type, choose/install the one matching the network card on the 
_remote_ computer.
3) You will be asked if you want to make a set of installation disks - yes, 
do this.  You will then be asked to boot the installation disks on the remote 
computer.  The rest should be straightforward.
 WH> I'm trying to figure this one out before I make a damned fool of
 WH> myself at a clients office!
Let's hope your client does not read this echo conference!
Regards, Alec
--- FleetStreet 1.12 NR
---------------