Vic Green wrote:
> Jim Byrnes wrote:
>> I am trying to get an Epson Stylus CX7000F all-in-one to print under 
>> eCS.  I found some Epson drivers on Hobbes and am using the EPOMNI5.C80 
>> driver.
>>
>> Usbconfig and the USB resource manager see it correctly. When I 
>> installed it and the driver it showed up correctly as a USB Epson in the 
>> output port section of the properties notebook.  The properties of the 
>> output port show it as online - (attached).
>>
>> Using the properties notebook I access an Epson utility that cleans the 
>> print nozzles and aligns the printhead.  If I click on the align 
>> printhead option and then select vertical alignment it ejects a blank 
>> page and if I select hortizontal its led display says printing but 
>> nothing happens.  If I try to print from an application the led does not 
>> change to printing... and nothing is printed.
>>
>> Can anyone be of any help?
>>
>> Thanks,  Jim
>>
>>
>>  
> 
> Jim,Use the C70 driver,not the C80. I have an RX620 here and I use the 
> C60 driver and it works.HTH
> Vic Green
> 
> 
>  

Vic,

I just tried the C70 and when that did not help I tried the C60 and 
still nothing going to the printer.  I am using the EPOMNI5.zip file I 
got from hobbes, what are you using?

Thanks for you ideas.

Regards, Jim


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---