dwl100tr wrote:
> Hi All,
>
> Can anyone help me with this?
>
> I recently bought a Brother 2070N mono laser since I had read good
> reports on several websites about it's compatibility with eCS and,
> using the 2060 driver (as recommended on the Hardware.ru site), it
> generally works fine.
>
> However, in the job properties, I cannot get the page orientation
> radio buttons to accept either portrait or landscape and, as a
> consequence, everything prints portrait - I cannot print anything
> landscape.
>
> This printer is shared across my network with a Window XP box and
> programs from there which normally send landscape reports print perfectly.
>
> I have tried various other drivers (including Laserjet 6 which is
> supposed to work) but none allow me to set the radio button correctly.
>
> All advice gratefully received!!
>
> Dave Lister 
>
>
>
>  
>
>   
Use the HL-1250 driver, turn off use fast fonts and turn in use system 
fonts and it "should" work OK - I have the HL-2040 here which is the 
same printer but without network capability.

By the way the HL02070N is available here in Australia for only 
AU$129.00 (about  UKL 60) - so a real bargain for a real (non-win) 
network laser printer.

Cheers/2

Ed.
>  
>
>   



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---