In , on 10/18/07
   at 01:24 PM, Steve Wendt  said:

Hi,

>> I could never get a stable system if my Adaptec card
>> shared the IRQ, especially the same IRQ as a NIC.

>Probably due to a buggy NIC driver.  Considering IBM's sample NIC driver 
>dated back to the stone age, there are lots of problematic ones.

It's not the age, but the fact the the IRQ sharing code was wrong.  This
is a problem with sample drivers.  You can only test them by inspection.


Steven

-- 
----------------------------------------------------------------------
"Steven Levine"   MR2/ICE 3.00 beta
09pre #10183 eCS/Warp/DIY/14.103a_W4 etc.
www.scoug.com irc.ca.webbnet.info #scoug (Wed 7pm PST)
----------------------------------------------------------------------



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---