Jim Byrnes wrote:
> I am trying to get an Epson Stylus CX7000F all-in-one to print under 
> eCS.  I found some Epson drivers on Hobbes and am using the EPOMNI5.C80 
> driver.
> 
> Usbconfig and the USB resource manager see it correctly. When I 
> installed it and the driver it showed up correctly as a USB Epson in the 
> output port section of the properties notebook.  The properties of the 
> output port show it as online - (attached).
> 
> Using the properties notebook I access an Epson utility that cleans the 
> print nozzles and aligns the printhead.  If I click on the align 
> printhead option and then select vertical alignment it ejects a blank 
> page and if I select hortizontal its led display says printing but 
> nothing happens.  If I try to print from an application the led does not 
> change to printing... and nothing is printed.
> 
> Can anyone be of any help?
> 
> Thanks,  Jim
> 
> 
>  

Jim,Use the C70 driver,not the C80. I have an RX620 here and I use the 
C60 driver and it works.HTH
Vic Green


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---