I am trying to get an Epson Stylus CX7000F all-in-one to print under 
eCS.  I found some Epson drivers on Hobbes and am using the EPOMNI5.C80 
driver.

Usbconfig and the USB resource manager see it correctly. When I 
installed it and the driver it showed up correctly as a USB Epson in the 
output port section of the properties notebook.  The properties of the 
output port show it as online - (attached).

Using the properties notebook I access an Epson utility that cleans the 
print nozzles and aligns the printhead.  If I click on the align 
printhead option and then select vertical alignment it ejects a blank 
page and if I select hortizontal its led display says printing but 
nothing happens.  If I try to print from an application the led does not 
change to printing... and nothing is printed.

Can anyone be of any help?

Thanks,  Jim


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---