Jonathan, please note that this echo is not operated by NetComm, it is
frequented by NetComm/Avtek users. Your message would be better directed to
"All".

 JF> I have been using a SLIP connection to the Melbpc Internet
 JF> with the OS/2 internet access kit with great success as well as to a
 JF> commercial internet provider. I have never been able to maintain a PPP
 JF> connection on either however as after connecting I get a carrier loss with

This sounds like it's an error in your dialing/login script. I have
installed a couple of sites with E11Fs, using the IAK, with CompuServe as
their provider, and have no problems. Do you have VJ compression enabled ?
Try toggling the state of that flag.

BTW, the init$ I would recommend for the newer E-series beasts is
AT&F&C1&D2S11=55S7=60%C2W2.

 JF> occurs? I can connect with a USR14000 Sporster with no problems. Thanks

Do you mean you can establish a PPP connect, or just an ordinary terminal
program connect ? The fact that you can use SLIP normally indicates you
don't have a modem problem, this is an IAK setup problem.

-- Lewin A.R.W. Edwards [Team OS/2]  Tel 0419320415 * 0412809805 * 0414927056

--- GoldED 2.41+