Don't know if this is your case, but when I install the epomni driver
for my Epson 1520 from  the eCS list of drivers, not all the files are
copied over to the right directory. I copy them by hand from the
drivers I expanded by myself, and then the printer works. 

Beth


On Sun, 13 Jan 2008 16:20:38 -0600, Jim Byrnes wrote:

>I am trying to get an Epson Stylus CX7000F all-in-one to print under 
>eCS.  I found some Epson drivers on Hobbes and am using the EPOMNI5.C80 
>driver.
>
>Usbconfig and the USB resource manager see it correctly. When I 
>installed it and the driver it showed up correctly as a USB Epson in the 
>output port section of the properties notebook.  The properties of the 
>output port show it as online - (attached).
>
>Using the properties notebook I access an Epson utility that cleans the 
>print nozzles and aligns the printhead.  If I click on the align 
>printhead option and then select vertical alignment it ejects a blank 
>page and if I select hortizontal its led display says printing but 
>nothing happens.  If I try to print from an application the led does not 
>change to printing... and nothing is printed.
>
>Can anyone be of any help?
>
>Thanks,  Jim
>
>
> 
>Yahoo! Groups Links
>
>
>
>




 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---