On Nov 9, 2007 11:33 PM,   wrote:
>  Been following Warpdennis activity on installing usb flash drives. 
Today decided to do the same.  From all the helpful hints installed usb
> drivers on a Warp 4 fix15 usb 1.1 controller.  Drivers as follows:
>
> BASEDEV=USBUHCD.SYS /V
> BASEDEV=USBD.SYS /V
> BASEDEV=USBHID.SYS /V
> BASEDEV=CWUSBMSD.ADD /REMOVABLES:1 /FIXED_DISKS:0 /FORCE_TO_REMOVABLE /V
>
> 1-26-03   6:18p     31250          34  cwusbmsd.add
> 9-06-02   3:46p     31846           0  USBMSD.ADD
> 9-14-05   4:35p     23386           0  USBD.SYS
> 9-14-05   5:35p     42112           0  usbehcd.sys
> 9-14-05   4:35p     13292           0  USBHID.SYS
> 9-14-05   5:35p     35532           0  usbohcd.sys
> 9-14-05   4:35p     28056           0  usbuhcd.sys
>
> Had used the standard usbmsd.sys but same outcome.  Usb stack
operational, 4g Kingston flash drive identified by bios at boot.  Icon in
> Drives folder.  Failure message is from fat32.ifs at boot stating it
cannot find any fat32 partitions.
>
> My config entries:
> IFS=D:\PROGRAM\fat32.ifs
> BASEDEV=DANIDASD.DMD /lf
> call=d:\program\cachef32.exe /F /L:OFF
>
> F32PARTS.EXE says there are no fat32 partitions even though flash
drive is formatted fat32 and operational with files in doze.
> Which is offending item:  usb stack or fat32 ifs?
>
> Also have usbcfgb7a.zip.  The .exe fails to load with message: 
exception occured: GetUserDefaultLCID at $0002b101 program terminated
>
>         Cal

Hi Cal,

Separately I have sent you an executable to check your FAT32 partition
visibility.

Regards,
Mike
-- 
Failed the exam for
--------------------
MCSE - Minesweeper Consultant and Solitaire Expert
--------------------
Personal replies to any of :
mikeoc (at) internode (dot) on (dot) net
mikeoc (at) austarnet (dot) com (dot) au
majilok (at) gmail (dot) com
[Please ZIP any attachments, other than GIF/JPG or plain-text]


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---