Scott, at 17:32 on Jan 30 1997, you wrote to ALL...

SL> I have a Dynalink 1433VQH (33k6 internal fastcard+).

Same here.  Nice modem, same as the USR Sportster (Texas DSP chipset).

SL> I think I got screwed on the manual. It's the manual for 
SL> their 28k8 modem, some of the commands mentioned aren't 
SL> accepted by the modem and there are some commands omitted 
SL> altogether (like the entire FAX command set).

Mine is the same.  Seems that Dynalink have supplied the manual for the
previous TI-based model, which had their S-registers mapped out identically
to the USR Courier.  The Dynalink's internal help screens (AT$ etc) may
well give you as much info as you need to know anyway.

SL> If someone has an electronic version of this modem's manual 
SL> I'd very much like to get it.

Try DLing the text manual for the latest version Sportster from
www.usr.com.  It should be the one you need.  There are still no Fax
commands though.

SL> Otherwise, I'd like to know what command I have to give it 
SL> to allow the modem to accept both FAX and Data calls. 
SL> Currently it'll only accept data calls. If I give it the 
SL> +FCLASS=1 (or whatever class I want) it'll accept only FAX 
SL> and not data.

Presumably you know that being rebadged USRs, the Dynalinks support Class 1
and Class 2.0 fax commands (not the far more common Class 2), and as such,
the USR adaptive answer connect string supplied with BGFAX will work
perfectly.

Regards, Bill

--- MsgedSQ/2 3.50