--- In os2hardware{at}yahoogroups.com, Kris Steenhaut
 wrote:
>
> dwl100tr ha scritto:
> >
> > Hi All,
> >
> > Can anyone help me with this?
> >
> > I recently bought a Brother 2070N mono laser since I had read good
> > reports on several websites about it's compatibility with eCS and,
> > using the 2060 driver (as recommended on the Hardware.ru site), it
> > generally works fine.
> >
> 
> Specs tell us:
> 
> EMULATION:   PCL6, IBM Proprinter, Epson FX-850
> 
> So the printer is good enough by all means.
> 
> My guess is the enemy aka Windy has disabled partly the PCL6 emulation. 
> Or maybe uses IBM Proprinter or Epson FX-850 without your consent.
> 
> I would like to advise you to detach the printer from Windy and do some 
> tests with the printer directly attached to the USB port of the eCS  
> computer.
> 
> Also, if a resulution 360*360 would be good enough, you could consider 
> to install the Epson FX-850 printer driver on all systems.
> 
> Incidently, as it is about PCL6, the latest HP laserdriver should do
the 
> job as well.
> 
> -- 
> Groeten uit Gent,
> 
>    Kris
>
Hi Kris,

Thanks for the reply.  The printer is already attached to the eCS box
directly through USB and shared - that's how my Windows box uses it -
so I don't think the problem is to do with Windows in this case
(especially since I have the correct driver installed on the windows
box and I can set portrait or landscape properly from there).  

Also, I have tried a variety of Laserjet drivers (other Brother & HP
ones) and *none* of them (so far) allow me to set the page orientation
radio buttons!  I have noticed that, if I install a Postscript driver,
I can set the radio buttons but this doesn't work since the 2070 isn't
Postscript!  I don't understand what's going on!

Dave



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---