JC> I have been getting some rather odd behaviour from the Courier lately and 

 JC> can't

 JC> put the finger on the cause.  Anyone wanna have a chew on this is 

 JC> welcome.

 JC>     start:  TR MR RS CS leds all on.

 JC>     dial:   OH comes on for up to 1 second, speaker on and start of dial 

 JC>             tone heard.

 JC>             OH and MR leds both go off after 1 second.

 JC>             MR stays off for 2-3 seconds then CS flashed (retrain?) and 

 JC> MR

 JC>             and CS leds come back on.

 JC>     finish: TR MR RS CS leds all on.



All I can say is "GET AN INTERNAL"  All These light do is Confuse the hell

out of me



 JC> At other times I can dial out, connect 28.8 /etc /etc like it should.



 JC> I've tried X5 which should have told it to blind dial with no effect.  I 



Try X1



 JC> ati5

 JC> USRobotics Courier HST Dual Standard V.34+ Fax NVRAM Settings...



 JC>    DIAL=TONE   B0  F1  M1  X7

 JC>    BAUD=38400  PARITY=N  WORDLEN=8



 JC>    &A3  &B1  &G0  &H1  &I0  &K3  &L0 
&M4  &N0

 JC>    &P1  &R2  &S0  &T5  &X0  &Y1  %N6



 JC>    S00=002  S02=255  S03=013  S04=010  S05=008  S06=002  S07=120  S08=002



Why would you prefer S07=120



Sorry, can't help



Russell

--- Terminate 4.00/Pro