* Reply to message originally in area CarbonArea

Hello Robert!

Sun Jul 26 2009, Robert Wolfe wrote to Gert Koefoed Andersen:

 ->> My mbse on my node 2 2:236/152 and point system has stopped on get 
 ->> connect to my main system as binkp.kofobbs.dk and said
 ->> Open TCP connection to "binkp.kofobbs.dk:24554"
 ->> Cannot connect to 87.16.62.106: Connection refused Cannot connect to 
 ->> binkp.kofobbs.dk

 ->> Do any one know why this happen and a way to fix it.

 RW>You might want to do some basic network connectivity tests to see if
 RW>that is not the problem (ie router ports forwarded, firewall open for
 RW>this port, etc).  Also check to see if the binkp daemon/service is
 RW>actually running.

I  have tried to do ping to the main fido system at binkp.kofobbs.dk and
fido1.kofobbs.net and the ping goes fine through anf give fine answer back
to the mbse pc fido2.kofobbs.net and ping back to fido2.kofobbs.net from
main fido pc gives too fine respons and answer.
so I tryed out let my main fido system trying polling fido2.kofobbs.net and
my binkd as node 2:236/150 polled fine with connect the mbse node
2:236/152, and right after this have the mbse polled and connected fine.
I took a look on my system point system another mbse running at 2:236/150.1
on my main fido system and saw that this too have got trouble by connect to
my binkd and is was not only that why my news point system as binkd too
have got the connection system with connection by binkd to binkd, so I
thinked that it must have been on the main fido systems binkd the error and
trouble was, but not for the world to poll my main system.
the trouble was gone in 4 hours and starting again in several hours by same
time and hour as the first day, and then gotr away when my main binkd
polled to local networks node 2, and then some hours later on the 2-3 day
efter it first was there the trouble got away gain.

  Take care,
            Gert

      - Get the best with linux - 

--- Msged/LNX 6.2.0 (Linux/2.6.28-gentoo-r5 (x86_64))