From: "da Silva, Joe" 

Well,

I've managed to get PNW installed on two PC's using
its usual VLM drivers, one running DR-DOS 6.0, the
other running DR-DOS 7.02+. I'll need to do some work
on optimizing memory, but apart from that, it all seems
to be working fine.

One question however. While I can use the command
'net down' to stop the server, I can't find any way to
start it up again without rebooting. The documentation
doesn't seem to mention anything about this. Does
anyone know if it's possible to restart the server
without the hassle of rebooting?

BTW, one interesting problem I encountered on the
DR-DOS 7.02+ (using the 7.03 kernel and EMM386;-)
PC, a Cyrix 6x86L which had previously run DR-DOS
6.0 quite nicely ... Now if I load EMM386 by itself in
'config.sys', it is quite unstable and locks-up within
a minute or so. If I load HIMEM (again, from 7.03;-)
before EMM386, everything's fine. (Of course, I tried
the usual thing of excluding all the UMB area, but it
made no difference.)

Joe.




-------------------------------------------------------------------------------------------------------
This email (including any attachment) is confidential. If you are not the
intended recipient,
you must not disclose or use this email or the information contained herein
for any purpose.
If you have received this email in error, please immediately advise us by
reply and delete this email.
This email may not be altered, forwarded or re-issued without our consent.
AMPY Email Metering is
not responsible for any changes made to this email or the effect of any
changes on the email’s meaning.
It is the responsibility of the recipient to scan this email for viruses
and faults prior to processing.
AMPY Email Metering shall not be liable for any loss or damage caused by
this email from transmission,
viruses, faults or the use of data accompanying this message. AMPY Email
Metering reserves all its
rights, including copyright,in this email.



--- Internet Rex 2.29