* Crossposted from: General Messages
 From: HELEN SAUTNER              To: DAVID MIZRACHI           
 Subj: WINDOWS 3.1 & COM4         Area: 48-Windowsdiscu   
DM>Hello everybody ,
DM>there is anyone out there who knows how to use com4 in windows 3.1
DM>properly?
DM>if you do , please leave me a message.
DM>thanks.
DM>C'ya
I replied too this I think from another BBS?  Anyway I tried too 
correct my message and I couldn't get back too the message.  Anyway 
You have too goto the Ports setup in the windows control program and 
edit them from there.  You have too select and IRQ and address away 
from the one that your mouse is currently using too avoid conflicts 
when your running software that involves the use of both the modem 
and the mouse.  For example if mouse is using com 1 port address 2E8 
or similar?  You'll need too adjust your port address on COM 4 so 
that it will not conflict with the mouse.  See your machines manual 
for how-to tips on customizing The Com ports.  I take it your 
insterested in setting up an internal modem?  In Windows adjust port 4 
buad rate too the highest setting for the buad rate (19200) 8N1, Base 
IO Port Address 02E8 IRQ 3. Flow Control Xon/Xoff..  These are the 
current settings that I am using with my modem and it Works GREAT! No 
errors whats-so-Ever!    I tried too answer this through another echo 
but I couldn't get back too correct my mistakes in the last message.  
So if you receive 2 messages with the same subject matter, that's why..
Hope this helps you?  Let me know okay?  I posted this Earlier on the BBS
and My Mail reader messed up and saved this too text rather then send it
Let me know if you recieved this, okay?
    
... Blue Wave - World Tour - 1996
--- Blue Wave/386 v2.20 [NR]
---------------