In a message of (23 Jul 97  22:55:14), Rick Collins wrote to Sysop:
RC> On Jul 22 18:43, 1997, Eustace Morton of 1:106/751 wrote:
DL>>> This is typically a flow control problem.  Be sure you have both
DL>>> your modem and your com program set for hardware (CTS/RTS) flow
DL>>> control. Software flow (Xon/Xoff) should be disabled.
EM>> How do you set hardware (CTS/RTS) on the Modem only?. Give an
EM>> example of yours.
RC> Flow control in the modem is set by the use of a modem command,
RC> usually as part of the init.  Configuring the comm program for a
RC> particular type of flow control _does not_ change the modem
RC> configuration - they're separate things.
RC> The commands vary by modem, but Rockwell chip modems generally use
RC> &K3 to enable hardware flow control.
I have a Compaq 28800 but not the manual. I think there is something about
the modem somewhere in the system but I havn't got around to reading it
yet. Anyway thanks for the information. Catch you L:ater!..
...There are no shortcuts to any place worth going.
E-MAIL: ************* elmorton@juno.com ****************
E-MAIL: ********* elmorton@751.conchbbs.com ************
ONLINE: The Morning Train BBS (281)860-0751, Texas, USA.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--- Alexi/Mail 2.02b (#10000)
---------------