On Jul 22 18:43, 1997, Eustace Morton of 1:106/751 wrote:
DL>> This is typically a flow control problem.  Be sure you have both
DL>> your modem and your com program set for hardware (CTS/RTS) flow control.
DL>> Software flow (Xon/Xoff) should be disabled.
EM> How do you set hardware (CTS/RTS) on the Modem only?.
EM> Give an example of yours.
Flow control in the modem is set by the use of a modem command, usually as 
part of the init.  Configuring the comm program for a particular type of flow 
control _does not_ change the modem configuration - they're separate things.
The commands vary by modem, but Rockwell chip modems generally use &K3 to 
enable hardware flow control.
Rick
--- MsgedSQ 3.30
---------------