At 17:33/16/Feb, Raymond Terrell (1:106/751) said:
====================================
BW>> You should be able to set Telix for a locked port and hardware only
BW>> flow control with a high-speed modem and connect with anything down
BW>> to 300 baud.  Have you configured it with CTS/RTS on and the other
BW>> two (DSR/DTR and Xon/Xoff) off?  Is the modem configured to CTS/RTS
RT> Could you elaborate a little more on this please?
There are three actual comm links:
Your PC to your modem;
Your modem to the remote modem; and
Remote modem to remote PC.
You're concerned only with the first two.
Each of those links can, and often do, operate at different speeds.  The 
modem "buffers" the speeds between the two links and uses "flow control" to 
manage this.
Therefore, you want to set your port speed (DTE speed, between your modem and 
your PC) higher than your maximum connect speed (57,600 or 115,200  for a 
33,600 link), you want Autobaud OFF in Telix, and you want to configure both 
your modem and Telix for hardware (RTS/CTS) flow control.
The speed the modem connects at (33.6 or 28.8 or even 9600) has no effect on 
the comm port speed which is set at 57,600 or 115,200.
Rick
--- Msged 4.00
---------------