Hi Mike,

 
 
 WE> WE> have a problem with Telix interpreting the time for download, 
 WE> whereby the 
 WE> WE> original estimated time will be a ridiculuosly low 0.5 
 WE> WE> minutes (or so), but 
 WE> WE> the actual time might be 5 or 8 minutes. Any bright ideas? 
> 
 MR> I have the same problem. it appears its a bug common with Telix as
 MR> well  as a  number of other comms programs.  It seems to be connected 
 MR> with  the original signal that comes down the line. 
 
 MR> With a 14400 modem with 42 bis on the original connect will come back 
 MR> as 38400 and Telix appears to use that speed to calculate the transfer

When I first installed my modem (internal) it worked perfectly, apart from 
the problem with actually making a connection, and I never had any problems
at all with Telix for Windows. The problem with the estimated time for
download only seems to have occurred since I started fiddling with the result
codes command on the advice of Bill Grimsley. However, the incorrect 
estimated time does not seem to interfere with the actual speed  and accuracy
of the download, so if I do not find out why it is happening it doesn't worry
me too much!
Most of my downloads come thru at 3100 -3200cps  approx. 
Incidentally, I previously had a 14400 internal USR Sportster, and it never
gave me any trouble at all, and neither did Telix.
Thanks for your thoughts.
Regards..................Warwick

--- Blue Wave/386 v2.30