-=> Quoting Ian Smith to Ben Perkuhn <=-

 BP> I have a user that has the same problem have even logged on
 BP> to his terminal
 BP> with 2400 and still no luck let me know if you find the problem.

 IS> Ben, I see from another message that you have a Simplemodem 288F V.FC.
 IS> What does your user that's having trouble use, do you know? 

No I don't know but it is a Rockwell based modem I know that for sure.

 IS> I just polled you twice, the first time with my default 'unknown node'
 IS> dial string, which requests MNP4 error correction and no compression,
 IS> and got: 
 IS> : 08 Jun 23:45:28 BINK Dialing 067-23-3028
 IS> # 08 Jun 23:45:53 BINK Connect 12000/Rel
 IS> [..]
 IS> # 08 Jun 23:46:17 BINK 000:20  << seconds, as reported by modem
 IS> # 08 Jun 23:46:17 BINK 007     << signal quality (out of 7).
 IS> : 08 Jun 23:46:18 BINK Poll completed

Yeah it came through with MNP4 no compression.

 IS> I then tried for LAPM + V.42bis, and got:

 IS> : 08 Jun 23:51:12 BINK Dialing 067-23-3028
 IS> # 08 Jun 23:51:41 BINK Connect 9600/Lap-M/Compression
 IS> [..]
 IS> # 08 Jun 23:52:06 BINK 000:20
 IS> # 08 Jun 23:52:06 BINK 007

Same here.

 IS> Interesting only getting a 12000 then a 9600 connect, especially with
 IS> a 7/7 line quality report, but they were good quick connects
 IS> nonetheless, with no sign of retraining, unlike the two local people
 IS> trying to connect here with what look like maybe being the same model. 
 IS> Would you mind sharing your modem settings / registers, and results of
 IS> ATI commands re DSP / firmware revision numbers, to compare with the
 IS> locals? 

Ok here is my stored profile and active profile.

ACTIVE PROFILE:
B0 E1 L2 M1 N1 Q0 T V1 W1 X3 Y0 &C1 &D2 &G0 &J0 &K3
&Q5 &R1 &S0 &T4 &X0 &Y0
S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:002 S07:090 S08:002 S09:006
S10:028 S11:095 S12:050 S18:000 S25:005 S26:001 S36:007 S37:000 S38:020 S44:020
S46:138 S48:007 S95:127

STORED PROFILE 0:
B0 E1 L2 M1 N1 Q0 T V1 W1 X3 Y0 &C1 &D2 &G0 &J0 &K3
&Q5 &R1 &S0 &T4 &X0
S00:000 S02:043 S06:002 S07:090 S08:002 S09:006 S10:028 S11:095 S12:050 S18:000
S36:007 S37:000 S40:105 S41:131 S46:138 S95:127

As you can see fairly standard the only difference for the original is the S95
register.

Below is the firmware revision number.

ati3
V1.000-AS39 VFC

Below is the modem id string

ati4
Simplemodem V1.000.00

And here is the data pump model and internal code.

ati6
RC288DPi Rev 05BA

The main problem my system had before i started getting the good reliable 
connects was that my phone line was very bad the guy from telstra came buy and
fixed up the lines and now I get mostly to my sydney poll 28.8k.

Hope this helps.



---=ð>BEN<ð=---

ÄùÄ CyBCiG v1.0
 | Ben Perkuhn - E-Mail |  cycle_1{at}msn.com

... Hanging: An early western form of bungee jumping.
--- OMX/Blue Wave v2.12