WZ>*** Quoting Patrick Moore to Warren Zatwarniski dated 09-06-96 ***
WZ>>         Well, it *IS* a beta code, but I you can FORCE 31.2k as
WZ>>         a max. by disabling the 3429 symbol rate.  Use S210=12 to
WZ>>         do this.
WZ>Yes, I do realize that it's beta code. I did what you suggested
WZ>above, and still do get the odd 33.6 connect though. Here's an
WZ>example:
WZ>atz1l0s210=12
        Not valid.  Everything after the ATZ1 was lost.
        Issue ATZ1, wait for the OK, issue ATL0S210=12 
WZ>OK
WZ>at
WZ>OK
WZ>atdt1-306-995-7000
WZ>CONNECT 33600/ARQ
WZ>Welcome to Saskatchewan Sympatico 
WZ>Port 4-8
WZ>login: zatww
WZ>Password: 
WZ>SL/IP session from (142.165.5.37) to 142.165.27.46 
WZ>Connected.  Your IP address is 142.165.27.46.
WZ>Also, I was getting disconnected on occasion with my ISP. Here's some
WZ>info I captured when it happened. I don't know if it will help you or
WZ>not. I captured this a while ago. I'm not sure if it was before or
WZ>after I used the s210 setting.
WZ>at%q2
WZ>Termination reason   = Protocol violation
        What brand, model, and ROM code are in the modems used
        by your provider?  (I'm wondering about the USR units with
        the bug in LAP-M error correction, USR has a ROM to fix it.)
        The rest of the connection info. looked good for 33.6k.
-Patrick Moore
 Sysop of Supra BBS 
CMPQwk1.42 331ūThe best time to call most Bulletin Boards is Midnight to 6am
--- FLAME v1.1
---------------