Hello All (Especially to someone who can help me out here)

	Ever since the 10/4/96 my Modem has refused to detect a Dialtone,it
 returns a NO DIALTONE error,when I try to ring out.
 Although I can hear the DIALTONE in the Modems speaker.
 Every thing else seems to work fine ie.. RING BUSY CONNECT
 
 Let me explain the happenings. For a couple of weeks pryer to the 10th I
 was trying to setup my GETTY to answer a FAX call (after a single ring
 code sent before the Fax) so the Modem was left on during the day ,a
 couple of days during the week,so I could send myself test Faxes from
 work. I did get it to work :^)
	
	On the 10th I left it on again only that day was pretty stormy weather.
 When I got home I was showing the Mrs. how to send her FootyTips by Fax,
 that's when I got the NO DIALTONE message :^(

	Now me being a gentle quiet type of bloke I gave the Modem an AUSSIE
 (thump {at}#%*&) Ooops now there was a rattle inside. :^o 
 Not to worry take it back for warranty :^)
 Mr Wong (not real name) say "Oh dis wubbish,must take back to supryer
 he fix"..{2 weeks later}..Mr Wong said the supplier wont fix because
 there is something loose inside, must be physical damage.(mind you they
 didn't even open the casing).So I said I'll fix it myself.

	So when I opened it up I see a small circuit board floating around
 inside.I plugged it in,(Xed fingers) but still NO DIALTONE.(back to
 square one) :^(  I tried ATX3 blind-dial,this time NO CARRIER.
 So now I have to dial the number(telephone) and manually connect (T/D-
 button). :^((( 

	Now the BIG questions ?? Which chip is responsible for ring detection??
                         ?? Which is responsible for making Tones/Pulse???

 a)ROM?
 b)Rockwell RC144DPi
            R6645-20
 c)Rockwell C2900-11 
 d)something else	

 The Modem is a Prolink 14400LEW FAX/MODEM
  
 Anything I missed ? 
 Any help/suggestions ? (I'd like more info before heating the solder)

 Thanks in advance... :^)

 Catch Ya Round Like.....BLOBS OF SOLDER.

 Leigh.

 * AmyBW v2.13 *
... "I tried phone sex once, but the holes were too small."
--- FMail/386 1.02