TP> I was quite suprised when I discovered a few commands not in my

 TP> Dynalink manual, one being ati11:

 TP> ===========================================================

 TP> ati11                                                                     

 TP> USRobotics Sportster 33600 V.34+ Fax Link Diagnostics ...



 TP> Modulation                  Unknown Speed

 TP> Carrier Freq     (Hz)       1959/1959

 TP> Symbol Rate                 3429/3429

 TP> Trellis Code                64S-4D/64S-4D

 TP> Nonlinear Encoding          ON/ON

 TP> Precoding                   ON/ON

 TP> Shaping                     OFF/ON

 TP> Preemphasis      (-dB)      2/4

 TP> Recv/Xmit Level  (-dBm)     15/10

 TP> SNR              (dB)       43

 TP> Near Echo Loss   (dB)       20

 TP> Far Echo Loss    (dB)       60

 TP> Round Trip Delay (msec)     4



With that Recv/xmit level and Signal to noise ratio you should have NO

trouble talking to the world at 33600/33600 (both ways)





Log into David Drummonds BBS.

and do +++

after the OK

type ATI6I7I11Y11

(capture this dump for us and I'll knock up a line probe graph for you )

now to get back to the BBS type either ATO1 or ATO2



Just how far aare you from your exchange (if those figures above are

correct then you would have to be on the roof or inside the damn

exchange) Though your near echo loss suggests that you are a fiar

distance away.



Who did you call to get these Stats.



--- Terminate 4.00/Pro