-=> Quoting Gery Rohrig to Anthony Pierce <=-

 -=> Quoting Anthony Pierce to All <=-

 

 AP> connect.   It may connect properly first try or take a few.  There will
 AP> be some sort  of connect - I can tell that by the modem LED's.  Telix
 AP> will say "there has  been a connect at 2400" and there
will be a few
 AP> garbage characters and  that's as good as it gets.  The only way I can
 AP> disconnect is to turn the  modem off and try and connect again and
 AP> eventually it connects normally.   
 AP> Any suggestions on how can I get around this problem??

 GR> Lets hear if you find a solution. I have the problem that my Avtek
 GR> (made by Netcomm) does not connect to a Netcomm M34F at all
 GR> !!!!!!!!!!!! 
 
 Gery, interested to hear about your Avtek not connecting to a M34F
 but my comms problem is only with one particular Bbs.  I don't think
 the problem's with my modem [M34F] as I receive excellent connects to 
 other systems.  The Bbs in question runs an Xstreama, a Lightfax and 
 a Dynalink.  I guess in my original message to 'all' I was asking if 
 there is some way of getting decent connects by changing my modem 
 settings or if there was something obvious I was doing wrong.  I am 
 trying to find a workaround solution.

 Anthony



... "Aye, that way goes the game."
___ Blue Wave/DOS v2.21

--- Maximus/2 3.00