-= Pete Replied to Bill Grimsley about: Spirit Viper =-

G'day Bill

 PC> Do you remember a few months back when i was complaining about a
 PC> system i call where the USR would get a 16800 vfc connect but
 PC> the Netcomm M11F could only get a 4800 at best, Well Telstra
 PC> fixed the line out there and now the M11F gets between 26400 and
 PC> 21600 but the USR refuses to connect and hangs up with a XID
 PC> Timeout error unless i force a v32bis connect which works fine,
 PC> modem at the other end is the same with same settings (Simple
 PC> VFC)

 BG> Try again with your Courier set to S27=48 (disable V.42 detect
 BG> phase).

Already thought of that and tried it, no luck :-( 
also tried S27=32 to disable V42 and use MNP4, no luck

if i can remember them all i've also tried
S56=64  Disable V34
S54=128 Disable V.8 mode
S54=32  Disable 3429 symbol rate
S51=64  Disable SREJ, The USR after call stats state that SREJ is on
        after the failed connect even though i doubt the Simple modem
        supports SREJ.

There may have been other settings i've tried Bill but have forgotten
about, If you can suggest anything else i'm willing to try it. This
problem is more of a "it won't beat me" problem than anything serious
as the Netcomm does the mail poll and it seems to work without
problem. BTW if i force V32bis with the USR it connects just fine with
V42/V42bis etc.

   -=Pete=-

--- OMX/Blue Wave v2.12