*** Quoting Patrick Moore to Warren Zatwarniski dated 09-06-96 ***
>         Well, it *IS* a beta code, but I you can FORCE 31.2k as
>         a max. by disabling the 3429 symbol rate.  Use S210=12 to
>         do this.
Yes, I do realize that it's beta code. I did what you suggested above, and 
still do get the odd 33.6 connect though. Here's an example:
atz1l0s210=12
OK
at
OK
atdt1-306-995-7000
CONNECT 33600/ARQ
Welcome to Saskatchewan Sympatico 
Port 4-8
login: zatww
Password: 
SL/IP session from (142.165.5.37) to 142.165.27.46 
Connected.  Your IP address is 142.165.27.46.
Also, I was getting disconnected on occasion with my ISP. Here's some info I 
captured when it happened. I don't know if it will help you or not. I 
captured this a while ago. I'm not sure if it was before or after I used the 
s210 setting.
at%q2
Termination reason   = Protocol violation
Transmitted bytes    =      32561
Received bytes       =     608538
Transmitted I frames =       1654     Octets               =      15548
Received I frames    =       7086     Octets               =     524103
Bad frames received  =        353     T401 resent I frames =          0
SREJs received       =          2     Resent I frames      =          2
REJs received        =          0     Resent I frames      =          0
SREJs transmitted    =         65
REJs transmitted     =          0
SREJ                 =    enabled
Transmit window size =         15
Receive window size  =         15
Transmit frame size  =        128
Receive frame size   =        128
BTLZ dictionary size =       2048
BTLZ string length   =         32
Transmit compression =    enabled
Receive compression  =    enabled
OK
at%q1
Far echo delay       = 3ms
Far echo level       = -50dBm
Pre-emphasis filter  = 8
Pre-Coding           = TX 1 RX 1
Shaping              = TX 0 RX 1
Non-linear encoding  = TX 1 RX 1
Trellis mapping      = 64-4D
SNR                  = 35dB
Normalized band width= 150Hz-3825Hz
Symbol rate          = 3429
--- FMail/386 1.02
---------------