* Reply to a message in Personal.
Hayes Support wrote in a message to Alan Rackmill:
AR>
MSGID: 1:107/101.0 36b57c70
AR>
REPLY: 1:396/1.0 36aea590
AR>Hayes Support wrote in a message to Alan Rackmill:
AR> HS> (Continued from previous message)
AR> HS> Alan,
AR> HS>    I notice on the systems you are having problems
AR> HS> connecting with you are getting a 'carrier 300' reported by
AR> HS> the software.  This is obviously incorrect, and the only
AR> HS> times I have seen software report that with a high speed
AR> HS> connection is when the modem returned a carrier speed that
AR> HS> the software was not configured to recognize, causing it to
AR> HS> default down to 300.  You might try calling that system from
AR> HS> terminal mode after issuing an AT&FS95=60 to the modem and
AR> HS> see what the modem reports as a carrier speed.  Do you know
AR> HS> what kind of modem is on the host system you are calling
AR> HS> into?
AR>To continue, I found the "Online User Reference Guide" both on the disk
AR>that
AR>came with the modem and on Hayes ftp site.
AR>The problem is that it only covers the 14.4 and 33.6 modems.
AR>And it does not cover all the S registers nor the AT commands.
AR>And some of the ones covered don't take.
AR>For example, AT&Q9 returns an ERROR message.
AR>WHat I am looking for is a ref guide that will cover the 56K modem.
AR>The online guide sent with the modem does not do that.
 HS> Alan,
 HS>    We'll be posting an updated 56K version of the reference
 HS> manual on our FTP site in the next few days.  I have already
 HS> sent the updated file to your netcom internet address.
I got it, thanks.
I see there are some new commands there.  ;-)
Alan
Team OS/2,
Fidonet 1:107/101, ibmNET 40:4371/101, OS2NET 80:135/15
internet: alanrack@ix.netcom.com
--- timEd/2 1.01
1:107/101)
---------------