Hayes Support wrote in a message to Alan Rackmill:
 HS> (Continued from previous message)
 HS> Alan,
 HS>    I notice on the systems you are having problems
 HS> connecting with you are getting a 'carrier 300' reported by
 HS> the software.  This is obviously incorrect, and the only
 HS> times I have seen software report that with a high speed
 HS> connection is when the modem returned a carrier speed that
 HS> the software was not configured to recognize, causing it to
 HS> default down to 300.  You might try calling that system from
 HS> terminal mode after issuing an AT&FS95=60 to the modem and
 HS> see what the modem reports as a carrier speed.  Do you know
 HS> what kind of modem is on the host system you are calling
 HS> into?
To continue, I found the "Online User Reference Guide" both on the disk that 
came with the modem and on Hayes ftp site.
The problem is that it only covers the 14.4 and 33.6 modems.
And it does not cover all the S registers nor the AT commands.
And some of the ones covered don't take.
For example, AT&Q9 returns an ERROR message.
WHat I am looking for is a ref guide that will cover the 56K modem.
The online guide sent with the modem does not do that.
Alan
Team OS/2,
Fidonet 1:107/101, ibmNET 40:4371/101, OS2NET 80:135/15
internet: alanrack@ix.netcom.com
--- timEd/2 1.01
1:107/101)
---------------