My config.sys file:
        NOTE I am running on a 386DX40 with 4mb of ram
Lastdrive=z
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE noems
dos=high,UMB
buffers=40,0
files=45
FCBS=4,0
rem BREAK=ON
rem DEVICEHIGH=C:\DOS\SETVER.EXE
stacks=17,256
rem DEVICEHIGH=C:\dos\MOUSE.SYS /Y
DeviceHIGH=C:\TSCSI\MA13B.SYS
DeviceHIGH=C:\TSCSI\TSCSI.SYS
DeviceHIGH=C:\TSCSI\TSLCDR.SYS /d:TSLCD
shell=c:\dos\command.com /e:4096 /p
devicehigh=c:\dos\ansi.sys
devicehigh=c:\opus\bnu.sys /M- /P:1 /T:512 /R:1024 /L0:19200
devicehigh=c:\opus\gateway2.sys
install=c:\opus\watchkit.com
installhigh=c:\opus\chat.com 20
My Autoexec.bat file
LH C:\DOS\MSCDEX /d:TSLCD /m:10 /E /v
@echo off
rem LH /S C:\DOS\SMARTDRV.EXE
PATH = 
C:\;c:\BT;C:\opus;c:\prot;c:\squish;C:\tick;C:\NORTON;C:\UTIL;C:\dos;C:\TSCSI;
 C:\TELCOM\TELIX;C:\ZZAP
set temp=c:\dos\temp
set tmp=c:\dos\temp
REM C:\DOS\dosshell
set squish=c:\squish\squish.cfg
set binkley=c:\bt
set opus=c:\opus\bbs.prm
set areafix=c:\squish\areafix.ctl
rem MODE LPT1:80,6 retry=r
SET COMSPEC=C:\DOS\COMMAND.COM
SET TELIX=C:\TELCOM\TELIX
set tic=c:\tick\tic.cfg
set raid=c:\tick\raid.cfg
lh c:\bt\vfos_ibm
lh C:\DOS\DOSKEY
PROMPT $e[7m$D $T$e[0m$H$H$H$H$H$H$_$P$G
c:
CD \bt
nerfbt.bat
P.S I have both an IDE and SCSI drive online. the Scsi drives: HD, Cdrom ad 
bernoulli box are loaded via the Tscsi drivers. using a Trantor T130B Scsi 
card using IRQ5, its an 8bit card and I don't use a printer.
        Can someone give me a clue of what exactly is wrong here?
                                Michele Marie Dalene
  
--- OPMED 3.00
---------------