-=> Quoting Muhammad hidayat to All <=-
 >>SNIP<<
 Mh> the game a new  perspective. However, I found that my 3-button mouse
 Mh> (in mouse aiming mode)  looks down when I push it up and up when I push
 Mh> it down, in other words the  Y-axis movement is reversed. This only
 >>SNIP<<
   Muhammad,
       I'm not too sure I understand what you are saying, so I went
     back into DUKE and checked the mouse. When you turn "Mouse
     Aiming" on (the "U" key), Duke should look up when you pull back
     on the mouse and vice-versa. If yours does not do this, check the
     "Setup". Go to the "Advanced" section and look at your mouse
     settings. The x axis should be set for "analog_turning", and the
     y axis should be "analog_moving". The digital portion should be
     blank.
       If you have all of the above, and the mouse is doing what it
     should be doing but you want to change it, delete your current
     "setup" file. Then redo the "setup" program using the "Advanced"
     section to set the analog settings as above and the digital lines
     for "look_up" & "look_down". The big problem with this setup is
     every time you move the mouse forward or back, Duke will look up
     or down! It will probably work ok if you use the buttons to move
     with and can hold the mouse fairly steady while you play. Try it
     out and see if you like it. Probably should save your old "setup"
     file though, in case it sucks. Will be easy to just delete the
     new one and replace it with the old. Good luck!
   Mike.
--- FMail/386 1.02
---------------