I had a problem the other day with retrains and the remote system locked up 
because of it. Here is my log after I dissconnected. The remote modem is a 
SR
28.8 and I have the Supra PnP internal.
at%q2
Termination reason   = Excessive retransmissions
Transmitted bytes    =       1873
Received bytes       =     451575
Transmitted I frames =       1851     Octets               =       4845
Received I frames    =      19277     Octets               =     161516
Bad frames received  =        365     T401 resent I frames =          8
SREJs received       =          0     Resent I frames      =          0
REJs received        =          4     Resent I frames      =          8
SREJs transmitted    =          0
REJs transmitted     =         10
SREJ                 =   disabled
Transmit window size =         15
Receive window size  =         15
Transmit frame size  =        128
Receive frame size   =        128
BTLZ dictionary size =       2048
BTLZ string length   =         32
Transmit compression =    enabled
Receive compression  =    enabled
Transmit frame size  =        128
Receive frame size   =        128
OK
at%q1
Far echo delay       = 2ms
Far echo level       = -50dBm
Pre-emphasis filter  = 7
Pre-Coding           = TX 1 RX 1
Shaping              = TX 0 RX 1
Non-linear encoding  = TX 1 RX 1
Trellis mapping      = 64-4D
SNR                  = 35dB
Normalized band width= 150Hz-3675Hz
Symbol rate          = 3200
TX carrier           = low
RX carrier           = low
OK
BTW how do you turn on the SREJ, and if I did would it help?
--- Renegade v5-11 Exp
---------------