On 15 Jul 96  13:44:00, Michael Raiteri wrote to Tom Przeor:



 MR> I now have the fax part working perfectly with Faxworks Pro under OS/2

 MR> but still problems with Winfax Pro under OS/2. What init string do you

 MR> use for the fax.



I don't use anything special for faxing, apart from what the

software does - I'm using BitFax Pro for Windows which came with my

older 14.4 Dynalink.

 

 MR> The other thing is that the Dynalink modem is inconsistent with its

 MR> connects with an unacceptably high negotiation failure rate.

 

 TP>I always get 28.8 with v34 and 33.6 with v34+ modems around town.



 MR> Oh I only wish.  I think it must be the quality of the lines around

 MR> where I live as I have only had two 33.6 connects and a handful of 28.8

 MR> The majority seem to be 26400.



Capture few diagnostics screens (ATI6I11) and only while online

capture ATY11. That should give at least some idea about your line.

I'd put my money on your line giving problems but you never know. My

only trouble is with some Rockwell based modems, they don't connect

at all (either "Unable to retrain" or "MNP incopatibility" error

messages) but they connect happily at max speed half a minute later.



 MR> BTW would you mind sharing your modem settings with me.  It might be

 MR> of great assistance.



Nothing special, just X2 to fix tones detection, &K0 to disable

v42bis and I think I've cranked up tone diallind to a faster pace.



Texas Instruments RK 33600 Fax Settings...



   B0  E1  F1  L1  M1  Q0  V1  X2  Y1

   BAUD=57600  PARITY=N  WORDLEN=8

   DIAL=HUNT   ON HOOK



   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &K0 
&M5  &N0

   &P0  &R2  &S0  &T5  &U0  &Y1



   S00=255  S01=000  S02=043  S03=013  S04=010  S05=008  S06=002

   S07=060  S08=002  S09=006  S10=014  S11=050  S12=050  S13=000

   S15=000  S16=000  S18=000  S19=000  S21=010  S22=017  S23=019

   S25=005  S27=000  S28=008  S29=020  S30=000  S31=128  S32=002

   S33=000  S34=000  S36=014  S38=000

 

 MR> Has anyone else had this problem and is there a solution.  I have a

 MR> pretty standard setup AT&F1&K0L1 - hardware handshaking with no

 MR> compression and sound low (still at ear screeching level though :( )



You can always experiment with some Blue Tack....either over the

speaker or in your ears.



Cheers,

Tom             



--- Blue Wave/DOS v2.30 [NR]